Skip to main content
Mixhand

Connect to an X32 or X Air

Last updated October 16, 2026

X32, M32 and X Air mixers are controlled over the network. Both need the app and the mixer to be on the same network, and you enter the mixer's IP address.

Steps

  1. Connect the mixer to your router by cable if you can. Connect your phone or computer to the same router.
  2. Find the mixer's IP address in the mixer's network settings.
  3. In Mixhand, open the Mixers screen and enter that IP address.
  4. Wait for the mixer to be read. When the state shows live, you can mix.

How many devices can connect

An X32 or M32 serves 4 remote clients at the same time. An X Air mixer serves 8.

A device that disconnects can keep its slot for about 10 seconds. If you restart the app and connect again, wait a moment.

To give each musician a monitor mix without using up these connections, use hub mode.

Wi-Fi tips

The mixer sends faster than a slow Wi-Fi link can pass on, and lost messages are silent. Mixhand paces its requests, but a router used only for sound and a cable to the mixer give the steadiest show.

Status of these consoles

X32, M32 and X Air are in preview. They work against our simulators and are being verified on real consoles.

All docs